|
EP80S 80 Tonne Electric Hydraulic Workshop Press
Gauge positioned for easy reading, calibrated in P.S.I and BAR for accurate control when pressing .
Low Pressure Hydraulic System ensuring long life.
Hydraulic Ram Fitted with a stroke restrictor valve to prevent damage.
Precision built hydraulic pump and ram.
All Pumps are fitted with a pressure release valve to prevent damage.
All welded heavy duty construction frame.
All Presses are compleate with a 100mm dia. pressure guage and one pair of universal "vee" blocks.
Each press is overload tested and a test certificate / letter of conformity supplied.
Each press has been individually tested as a complete unit.
All hydraulic cylinder piston rods are fitted with a removable end cap, the end cap is held in place by a concealed ring. This eleminates the need for external fixing screws that can interfere when using the piston rod in a confined space. The press end cap cap is easily removed for fitting mandrels. Mandrels can be manufactured to customer requirements.
Precise guidance of the piston rod through a high quality self-lubricating guide bush ensures first class pressing, the cylinder is manufactured from top quality hydraulic tube and is an all welded construction.
The hydraulic pump and cylinder are manufactured from top quality materials using the selective assembly method, this gives good tolerance and long working life to the press.
All products come with a 12 month guarantee.
Type : FLOOR
Capacity (tonnes) : 80
O/A Frame Height (A) mm : 1980
Frame Height (B) mm : 1720
O/A Frame Width (C) mm : 1560
Frame Width(D)mm : 1270
Min.Daylight(E) mm : 100
Max.Daylight(F) mm : 900
Side Clearance between Posts(J)mm : 260
Front Clearance between Posts(K)mm : 1065
O/A Frame Depth(L)mm : 800
Ram Stroke mm : 180
Pump type: Single Phase 22/240Volt 50Hz
(Three Phase motors can be supplied on request)
Approx. Weight Kg : 660
|
